|
|
|
Static
Sleeve Bearings
Available from Hitachi Maxco for either steel
shaft or stub shaft locations, the UHMW-PE integral
shoulder Static Sleeve Bearings are available as a
low cost alternative to replacement of steel wall
bearings and eliminates the load associated with
turning a steel shaft inside a wall bearing.
Clamps onto
Shaft
The Static Sleeve Bearing simply clamps onto
existing idler shafts, the idler sprockets are
mounted onto the bearings and now turn freely,
eliminating the resistance associated with the
turning heavy steel shafting inside worn or
corroded bearings. Zero Lubrication required.
Two Sizes
Available
Standard Duty is for use with UHMW all plastic
and metallic hub sprockets. Cast Nylon Spkt is for
use with HMAX Cast Nylon Sprockets which have a
longer Length-Thru-Bore.
|
|
Static Sleeve
Bearing on Idler Shaft
|
Static Sleeve
Bearing Dimensions
|
|
|
Static Sleeve
Bearings feature integral set-collar side flanges,
two (2) set-screws, and 316 ss Hardware.
For additional details and photos, click on the PDF
link
|
Home
© Hitachi
Maxco, Ltd. • 1630 Cobb International Blvd. •
Kennesaw, GA • 30152 • Ph: 800-241-8209
• Fx: 770-424-9145
www.hitmax.com
|
